Brookview Industries builds wiring harnesses, LED lighting and complete electrical kits for enclosed trailers, engineered to plug in and work the first time.
Custom harnesses built to your trailer's exact length and layout: colour-coded, loomed, sealed at every connection and continuity-tested before they leave the shop.
Cut to length
Sealed connectors
Protective sheathing
Bench tested
02 / LED lighting kits
Every light, every circuit, all LED.
Stop, turn and tail, clearance and ID bars, side markers and licence lighting, laid out properly and matched to the harness so nothing is guesswork.
Stop · Turn · Tail
Clearance & ID
Side markers
Low current draw
03 / Breakaway safety kits
If the hitch lets go, the brakes don't.
Breakaway switch, lanyard, battery and charge line, pre-wired into the brake circuit so the trailer locks up on its own if it ever separates from the tow vehicle.
Switch & lanyard
Breakaway battery
Charge line
Brake-circuit ready
04 / Plug & play installation
Connect it. Clip it. Done.
Pre-terminated leads, labelled branches and a standard 7-way RV blade plug at the tongue. Kits drop in fast, whether you're building one trailer or a production line.
7-way RV blade
Pre-terminated
Labelled branches
Hours, not days
05 / Lighting & power solutions
Light the inside like you mean it.
Interior LED strips, porch and load lights, switch panels and 12V battery systems with charge lines, so the trailer works for you after dark and away from the truck.
Interior LED
Porch & load lights
12V battery boxes
Switch panels
06 / Complete kits
One box. Everything. Matched to your trailer.
Harness, lights, breakaway, plug and power, engineered together as one system and shipped as a complete kit. No sourcing from five suppliers. No mismatched parts.
We're an Ontario shop that does one thing obsessively well: the electrical side of enclosed trailers. From a single custom build to steady production runs, every harness and kit is designed, built and tested under one roof in Milverton.
12VTrailer lighting & power systems
7-wayRV blade, ready at the tongue
100%Of harnesses tested before shipping
ONBuilt in Milverton, Ontario
Services
Everything electrical, from hitch to tail.
Pick one piece or the whole system. Every component is designed to work with the rest.
Wiring harnesses
Custom-length main and branch harnesses, colour-coded and loomed, with sealed connections that stand up to road salt, spray and Ontario winters.
Main trunk & branch leads
Split loom & protective sheathing
Heat-shrink sealed splices
Built to your drawing or ours
LED lighting kits New
Complete LED packages: stop, turn and tail, clearance, ID bars, side markers and licence lights, pre-matched to the harness.
Tail & stop/turn
Clearance & ID bar
Side markers, front & rear
Licence plate lighting
Breakaway safety kits New
Switch, lanyard, battery and charge line, wired into the brake circuit so the trailer brakes itself if it ever separates.
Breakaway switch & pin
Sealed breakaway battery
Charge line from tow vehicle
Mounting box & hardware
Plug & play installation
Pre-terminated, labelled and ready to clip together. Designed so your crew installs a full system quickly, without a wiring diagram taped to the wall.
7-way RV blade plug & cord
Keyed, labelled connectors
Junction box at the tongue
Install support by phone
Trailer lighting
Interior LED strips, dome lights, porch lights over the side door and rear load lights that turn the trailer into a usable workspace after dark.
Interior LED strips & domes
Porch & load lights
Switch panels by the door
Clean, hidden routing
Power solutions
12V battery boxes, charge lines from the tow vehicle, fusing and distribution, so lights and accessories run whether or not the truck is attached.
Battery boxes & mounting
Charge lines & isolation
Fusing & distribution
Accessory circuits
Now including complete kits
The whole system, in one box.
A Brookview complete kit is every electrical component an enclosed trailer needs, engineered together and matched to your trailer's size and layout. Open the box, follow the labels, plug it in.
Sized to your trailer: 5' singles to 8.5' wide car haulers
One part number, one supplier, one point of contact
Consistent from the first trailer to the hundredth
Repeatable harnesses and kits delivered on schedule, so your line never waits on wiring.
Dealers & upfitters
Lighting upgrades, interior packages and replacement harnesses for the units on your lot.
Custom & race builders
Concession, toy-hauler and race trailers with power and lighting built around how you use them.
Fleets & contractors
Standardised, serviceable wiring across every trailer you run, with parts that match.
How it works
Spec to shipped, without the guesswork.
01
Spec
Tell us the trailer: size, axle count, door layout and what you want lit and powered.
02
Engineer
We lay out circuits, lengths and connector points, and confirm the plan with you.
03
Build
Harnesses are cut, terminated, sealed and loomed by hand in our Milverton shop.
04
Test
Every circuit is continuity-checked and every kit is checked against its list.
05
Plug in
Labelled, plug-and-play kits ship or get picked up, ready to install.
Why Brookview
Trailer wiring is the part people notice only when it fails.
So we build it like it can't. Clean routing, real protection and connections that are sealed, not taped.
Built for Canadian roads
Salt, slush, gravel and freeze-thaw. Sheathing and sealed connections are chosen for the conditions trailers actually see here.
Designed as one system
Harness, lights and power are specified together, so connectors match and every circuit is accounted for.
Made in Ontario
Designed and built in Milverton. Talk directly to the people building your harness.
Faster installs
Pre-terminated, labelled kits cut install time and the rework that comes from hand-wiring every unit.
FAQ
Good questions.
Do you build harnesses for one trailer, or only in volume?
Both. We build one-off custom harnesses and kits as well as repeat production runs for manufacturers and dealers.
What trailer sizes do your complete kits fit?
Kits are matched to the trailer, from small single-axle cargo trailers up to 8.5' wide tandem and car-hauler builds. Tell us the length, width and door layout and we'll spec it.
What plug do your kits use at the tongue?
Standard kits come with a 7-way RV blade plug and cord, the most common connector on North American tow vehicles. Other connectors are available on request.
Can you add interior lighting and a battery to my trailer?
Yes. Interior LED strips, porch and load lights, switch panels and 12V battery boxes with charge lines are all part of our lighting and power solutions.
Do you install, or do you just supply the parts?
Our kits are designed for plug-and-play installation by your own team, and we're available by phone to help. Contact us to discuss installation for your build.
Where are you located?
6602 Perth Rd 121, Milverton, Ontario N0K 1M0. Call ahead at 226-747-7684 before dropping by.
Request a quote
Let's wire your trailer.
Tell us about your build and we'll get back to you with a plan. Prefer to talk? Give us a call.